You don't need drivers for a hard disk -- you need drivers for the hard disk CONTROLLER your drives are plugged into. As such, telling us the model of the drive is little help - I can tell they're SATA, but not what controller you're using. Have you tried the AHCI driver? That works for very many SATA controllers. For the realtek card, try the r8169 driver. _____ From: udpcast-bounces(a)udpcast.linux.lu [mailto:udpcast-bounces@udpcast.linux.lu] On Behalf Of Rahul Rao Sent: Saturday, January 28, 2012 6:57 AM To: udpcast(a)udpcast.linux.lu Subject: [Udpcast] Drivers for NIC and HDD I was just looking out for drivers for NIC and Hard Disk. Their model numbers are as follows, NIC: 1) Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC(NDIS 6:20) Harddisk: 1) WDC WD2500 AAJS-60M0a0 ATA DEVICE 2) Hitachi HDP725016GLA380 ATA DEVICE Can you suggest me any other driver which can be compatible with this model of the hardware. -- Regards, Rahul Rao Msc-CA, SICSR _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1913 / Virus Database: 2109/4779 - Release Date: 02/01/12