Compiling 2.6.25 and buliding initrd works perfectly for PXE boot with
Matthias Ehmann schrieb:
Michael D. Setzer II schrieb:
-----BEGIN PGP SIGNED MESSAGE-----
Just a quick question. When you did the build, were you logged in as root?
Many of the special files only work with root. I've had some people make the
mistake of building with an id other than root.
Thanks for your reply.
No this is not the problem. This was not the first kernel I built. ;-)
Kernel 2.6.23 works successful under the same preconditions. But as
already mentioned I had to back port the e1000e driver.
I will have a look at the ISO you mentioned. Could you send the .config
file for the 2.6.25 kernel?
I've built many kernels on my g4l cd image,
and include udp-sender and
udp-reciever on the cd image, but have only setup the g4l to be use the
reciever. You could see it those kernels would work. I haven't setup a PXE
with g4l, but others have.
Latest version with even the 2.6.25 kernel is available at:
Udpcast mailing list
Dr. Matthias Ehmann
Didaktik der Informatik
Lehrstuhl für Mathematik und ihre Didaktik
Tel +49 921 55 7657
Fax + 49 921 55 7655