Dear Sir:

I am testing UDP-sender.exe and UDP-receiver.exe under WinXP with following commands. But a error (marked by red color) happens after the server transfers data once. Under linux, I have never met this problem. I am wonder if there is a bug?

UDP-sender:

C:\Documents and Settings\hwsun.PSL-AD\Desktop\UDPCast-run>udp-sender -f test.tx

t -P 5004 -M 239.1.1.1 --daemon-mode --nokbd --min-receivers 1

Udp-sender 2007-02-05

Using mcast address 234.81.112.185

UDP sender for test.txt at 10.81.112.185 on Intel(R) PRO/100 VE Network Connecti

on - Packet Scheduler Miniport (00-00-e2-5b-c7-66)

Broadcasting control to 239.1.1.1

New connection from 10.81.112.185 (#0) 00000009

Starting transfer: 00000009

bytes= 1 230 re-xmits=0000000 ( 0.0%) slice=0000 1 230 - 0

Transfer complete.

Disconnecting #0 (10.81.112.185)

bind socket to 10.81.112.185:5005 (Bad file descriptor) <------------ why???

UDP-receiver:

C:\Documents and Settings\hwsun.PSL-AD\Desktop\UDPCast-run>udp-receiver -f mytes

t.txt -P 5004 -M 239.1.1.1 --nokbd

Udp-receiver 2007-02-05

UDP receiver for mytest.txt at 10.81.112.185 on Intel(R) PRO/100 VE Network Conn

ection - Packet Scheduler Miniport (00-00-e2-5b-c7-66)

received message, cap=00000009

Connected as #0 to 10.81.112.185

Listening to multicast on 234.81.112.185

bytes= 1 230 ( 0.01 Mbps) 1 230

Transfer complete.

Best Regards,

Mr. Haiwei Sun

R&D Engineer

Panasonic Singapore Laboratories Pte Ltd

Singapore