begin Monday 15 December 2003 18:22, Randy Reames quote:
I have used udpcast to clone ide boxes. But I cannot
get it to recognize
the scsi drives (raid 5) on a couple servers. It looks like the scsi
modules are there but are not being loaded at the cd boot. How can I
clone /dev/sda on these servers?
Actually, the menu system does not yet support loading of the scsi
However, if you have these modules present on your image, you can load
them manually, as follows:
1. Press Control-Alt-F2 , and then RETURN to get a shell prompt.
2. Load the needed module:
3. Press Control-Alt-F1 to get back to the menu system.
4. When asked to chose a disk, chose OTHER
5. Enter the disc's name. As the udpcast bootdisk uses devfs, you need
to enter the "long" name, such as:
/dev/scsi/host0/bus0/target1/lun0/disc for the whole disc,
/dev/scsi/host0/bus0/target1/lun0/part6 for just one partition