On 26 Feb 2006 at 20:48, Benjamin Moore wrote:
Date sent: Sun, 26 Feb 2006 20:48:43 -0800
From: Benjamin Moore <bmoore(a)tacticallanguage.com>
Subject: Re: [Udpcast] Lots of Timeouts using udpcast
Michael D. Setzer II wrote:
>Some questions about the setup. Is it one or
two machines that is
>timeouts? I have a lab of 20 machines, one was
causing this problem. If I
>imaged all the others together there would be very few timeouts compared
>to thiis one. Turned out to be the hard drive in that machine,
which was the
>same brand as all the others. In swapping the
hard drive to
>the problem moved from the one machien to the
other. Ran diagnostics on
>the drive,and it reports no errors, but it doesn't seem to be able
>with writing the sections of the drive that
are blank, so the compressed
>informaiton is coming in faster than the machine can write it to
>seen that these drives can only do about 45MB
after the buffer gets full.
2 Machines if I'm reading the error message correctly... I don't
understand what the error is trying to tell me. I'll try imaging them
individually and see if the problem goes away. You're theory about the
drive writing sounds plausible. I'll experiment, since I'm going to be
doing this off and on for the next 6-12 months.
>Also, what IP addresses are you using on the
systems. I had a problem,
>whereas the College MIS has 3 Class C blocks all the the same physical
>network with a standard Class C subnet mask (Don't ask why??), and if I
>used dhcp it would only work with machines on the same class C. I ended
>up making an ipmac.txt file for the udpcast, and had it assign 10.0.7.x
>numbers to my machines (Lab D-7).
192.168.15.* But I'm doing my imaging completely off the external
network. All that's on the network is the server and the machines that
I'm imaging and they're all plugged into our HP 24 port switch.
>Also, you could try a cross-over cable and
directly connect two machines,
>and see if it differs from going thru the switch..
I'll give this a try as well, if I have time. If it is one of the
machines... yuck... but if I'm interpretting the error correctly it is
having a problem with both of them isn't it?
>Another issue that you might want to look at,
are you clearing the unused
>space on the drive before doing the transfer. I have a program
that I use
>my G4L project (at least the last four
releases) and udpcast.
>Is a little C program (source code at the same site with .cpp),
and it works
>for FAT and NTFS partitions. I just copy the
file to the machine,
and from the
>command prompt you blank6 c (c being the
drive to clear). It just creates
>2GB files full of nulls until the disk is full, and deletes them
>will speed up the compress and greatly reduce
the time to
transmitt the data.
>When I image my lab machines, I can get about
20+ MB/sec considering the
>uncompressed size of the 80GB drives.
I used Erasor. But I'm using g4l for all the setup. It's a great
>Don't know if that help, or just confused
things more. Just yesterday, I
>imaged the other 19 machines in my lab with 80GB drive in about 50
>minutes with a hub.
>One other thing that you might want to look at is the
>I've found that if I set it to 90M it
reduces these timeouts for the 18
>machines, and 80M will sometimes have none. With the problem machine, it
>usually takes 60M or lower to stop the errors.
I'll give this a try when I have more of them hooked up. I'm still
waiting for Dell to deliver 12 machines.
Thanks for the help. (I'll be back at work trying this out soon. :-)
Udpcast mailing list
Michael D. Setzer II - Computer Science Instructor
Guam Community College Computer Center
Guam - Where America's Day Begins
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC Seti@Home Total Credits 473413.537949
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8 -- QDPGP 2.61c
-----END PGP SIGNATURE-----