Dear Mikes:
Thanks for your suggestion. I tried to turn off my firewall. However, it comes out with the same error. Could we fix port to 5004 only to all receiver, So that all receiver can access the same IP:Port to get the same data?
Best Regards, Haiwei
-----Original Message----- From: Michael D. Setzer II [mailto:mikes@kuentos.guam.net] Sent: Tuesday, February 13, 2007 3:35 PM To: Haiwei Sun Subject: Re: [Udpcast] a bug from UDP-sender.exe under WinXP?
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Not an expert on this, but I believe you need to open port 5005 in addition to the 5004 on the firewall. Usually, the udpcast uses port 9000 for the most part, but uses 9001 for something. Don't recall exactly what it is,
but
it appears to be the next port after the default port.
On 13 Feb 2007 at 14:34, Haiwei Sun wrote:
Dear Sir:
I am testing UDP-sender.exe and UDP-receiver.exe under WinXP with following commands. But a error (marked by red color) happens after the server transfers data once. Under linux, I have never met this problem. I am wonder if there is a bug?
UDP-sender:
C:\Documents and Settings\hwsun.PSL-AD\Desktop\UDPCast-run>udp- sender -f test.tx t -P 5004 -M 239.1.1.1 --daemon-mode --nokbd --min-receivers 1
Udp-sender 2007-02-05 Using mcast address 234.81.112.185 UDP sender for test.txt at 10.81.112.185 on Intel(R) PRO/100 VE Network Connecti on - Packet Scheduler Miniport (00-00-e2-5b-c7-66) Broadcasting control to 239.1.1.1 New connection from 10.81.112.185 (#0) 00000009 Starting transfer: 00000009 bytes=1 230 re-xmits=0000000 ( 0.0%) slice=0000 1 230 - 0
Transfer complete. Disconnecting #0 (10.81.112.185)
bind socket to 10.81.112.185:5005 (Bad file descriptor) <------------ why???
UDP-receiver:
C:\Documents and Settings\hwsun.PSL-AD\Desktop\UDPCast-run>udp- receiver -f mytes t.txt -P 5004 -M 239.1.1.1 --nokbd
Udp-receiver 2007-02-05 UDP receiver for mytest.txt at 10.81.112.185 on Intel(R) PRO/100 VE Network Conn ection - Packet Scheduler Miniport (00-00-e2-5b-c7-66) received message, cap=00000009 Connected as #0 to 10.81.112.185 Listening to multicast on 234.81.112.185 bytes=1 230 ( 0.01 Mbps) 1 230 Transfer complete.
Best Regards,
Mr. Haiwei Sun R&D Engineer Panasonic Singapore Laboratories Pte Ltd Singapore
+----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:mikes@kuentos.guam.net mailto:msetzerii@gmail.com http://www.guam.net/home/mikes Guam - Where America's Day Begins +----------------------------------------------------------+
http://setiathome.berkeley.edu Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes (Total Hours: 287,489)
BOINC TOTAL CREDITS SETI@HOME/EINSTEIN@HOME/ROSETTA@HOME Total Credits 2742633.750347 Total Credits 510505.776350 Total Credits 8633.726962
-----BEGIN PGP SIGNATURE----- Version: PGP 6.5.8 -- QDPGP 2.61c Comment: http://community.wow.net/grt/qdpgp.html
iQA/AwUBRdDdfCzGQcr/2AKZEQJaowCg4meNGC0pmWCx/ZDxJdwEYLgugRkAoJXx fEykiFLy+GpwQe0YHKnfsa/c =qUp3 -----END PGP SIGNATURE-----
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The problem is that after a while 2 - 30 GB it surdently freezes and I can't get in touch with the mashine via the keyboard or anything. And the cloning-proces stops. I worked at is the whole night the other day (to 4 morning), but it keeps doing it. First I used a version 2 month old, then I updatet to the newest at that time (20070306) but is kept apering. I use no command-line-options and it is a switch with 20 mashines.
Any sugestions about what could be wrong?
Med venlig hilsen Gunner Poulsen Lærer på http://www.lyngbjerggaardskolen.dk Magnus' far!
Gunner Poulsen wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The problem is that after a while 2 - 30 GB it surdently freezes and I can't get in touch with the mashine via the keyboard or anything. And the cloning-proces stops. I worked at is the whole night the other day (to 4 morning), but it keeps doing it. First I used a version 2 month old, then I updatet to the newest at that time (20070306) but is kept apering. I use no command-line-options and it is a switch with 20 mashines.
Any sugestions about what could be wrong?
Could this be a hardware issue?
Any messages displayed before the freeze? Do the caps-lock and num-lock LEDs on the keyboard still react?
Which machine freezes? The sender, or one of the receivers? Or all at once?
Regards,
Alain
On Fri, 23 Mar 2007 13:59:10 +0100, Alain Knaff wrote
Gunner Poulsen wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The problem is that after a while 2 - 30 GB it surdently freezes and I can't get in touch with the mashine via the keyboard or anything. And the cloning-proces stops. I worked at is the whole night the other day (to 4 morning), but it keeps doing it. First I used a version 2 month old, then I updatet to the newest at that time (20070306) but is kept apering. I use no command-line-options and it is a switch with 20 mashines.
Any sugestions about what could be wrong?
Could this be a hardware issue?
In that case it is not a mashine specific hardware problem. I tryed to move the harddisk I am cloning from to another mashine and the same thing happend (by a diferent amount of GB).
Any messages displayed before the freeze?
No.
Do the caps-lock and num- lock LEDs on the keyboard still react?
No.
Which machine freezes? The sender, or one of the receivers? Or all at once?
The sender. The receivers keep wating and wating.....
Med venlig hilsen Gunner Poulsen Lærer på http://www.lyngbjerggaardskolen.dk Magnus' far!
Gunner Poulsen wrote:
In that case it is not a mashine specific hardware problem. I tryed to move the harddisk I am cloning from to another mashine and the same thing happend (by a diferent amount of GB).
How different was this other machine from the first one? And what happens if you use a different harddisk (just for testing, obviously)
Any messages displayed before the freeze?
No.
Do the caps-lock and num- lock LEDs on the keyboard still react?
No.
Ok, so it really does hang hard...
Which machine freezes? The sender, or one of the receivers? Or all at once?
The sender. The receivers keep wating and wating.....
Interesting
Alain
I have a problem: the sata disk (sda) is not recognized. There is no option offered to choose a disk to copy... (Everything works fine with older 'ide-machines')
Suse seems also to have some troubles? whereas knoppix works fine Here is a part of the hardware-list suse 10.2. is producing: any ideas? Best regards, wolfgang!
I hope the length of the list below is not annoying... ... 39: IDE 00.0: 10600 Disk [Created at block.218] UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_ST3808110AS_9LR0G8CJ Unique ID: z70z.YnxUayP7NI9 Parent ID: CLZK.13AlYnG+rp5 SysFS ID: /block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "ST3808110AS" Device: "ST3808110AS" Revision: "3.AA" Serial ID: "9LR0G8CJ" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_ST3808110AS_9LR0G8CJ, /dev/disk/by-id/ata-ST3808110AS_9LR0G8CJ, /dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0, /dev/disk/by-id/edd-int13_dev80 Device Number: block 8:0-8:15 BIOS id: 0x80 Geometry (Logical): CHS 9729/255/63 Size: 156301488 sectors a 512 bytes Geometry (BIOS EDD): CHS 155061/16/63 Size (BIOS EDD): 156301488 sectors Geometry (BIOS Legacy): CHS 1023/255/63 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (SATA controller) ...
... <6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177 <6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode <6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part <6>ata1: SATA max UDMA/133 cmd 0xDC826100 ctl 0x0 bmdma 0x0 irq 177 <6>ata2: SATA max UDMA/133 cmd 0xDC826180 ctl 0x0 bmdma 0x0 irq 177 <6>ata3: SATA max UDMA/133 cmd 0xDC826200 ctl 0x0 bmdma 0x0 irq 177 <6>ata4: SATA max UDMA/133 cmd 0xDC826280 ctl 0x0 bmdma 0x0 irq 177 <6>scsi0 : ahci <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32) <6>ata1.00: ata1: dev 0 multi count 16 <6>ata1.00: configured for UDMA/133 <6>scsi1 : ahci <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: ATAPI, max UDMA/100 <6>ata2.00: configured for UDMA/100 <6>scsi2 : ahci <6>ata3: SATA link down (SStatus 0 SControl 300) <6>scsi3 : ahci <6>ata4: SATA link down (SStatus 0 SControl 300) <5> Vendor: ATA Model: ST3808110AS Rev: 3.AA <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device : 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 sda3 < sda5 sda6 > <5>sd 0:0:0:0: Attached scsi disk sda <5> Vendor: PHILIPS Model: DROM6316 Rev: DD01 <5> Type: CD-ROM ANSI SCSI revision: 05 <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>scsi 1:0:0:0: Attached scsi generic sg1 type 5 <6>ATIIXP: IDE controller at PCI slot 0000:00:14.1 <6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193 <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ATIIXP: chipset revision 0 <6>ATIIXP: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:pio, hdb:pio <6>ATIIXP: simplex device: DMA disabled <6>ide1: ATIIXP Bus-Master DMA disabled (BIOS) <7>Probing IDE interface ide0... <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <7>Probing IDE interface ide1... <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <4>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 1:0:0:0: Attached scsi CD-ROM sr0 <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in <4> res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in <4> res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sda6, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
I've seen a freeze from using a wireless module while the wireless device was powered on (in a notebook being templated). Our solution on the Dell D620 was to ensure the antenae switch was powered off prior to imaging. Oddly enough, even with that powered off, we were still able to grab the MAC address for our host management database, so that was good.
Whatever is the cause, I'm pretty certain it is hardware or kernel+hardware related and unlikely to do with udpcast program itself. Anything that is erratic in how it fails (e.g. measure the number of minutes into the session, or at what step in boot up) points to pure hardware failure.
You could likely induce the same lock up by booting by PXE and not starting the udpcast session. Just leave it for an hour and see if it is stable.
--Donald Teed
On Fri, 23 Mar 2007, Gunner Poulsen wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The problem is that after a while 2 - 30 GB it surdently freezes and I can't get in touch with the mashine via the keyboard or anything. And the cloning-proces stops. I worked at is the whole night the other day (to 4 morning), but it keeps doing it. First I used a version 2 month old, then I updatet to the newest at that time (20070306) but is kept apering. I use no command-line-options and it is a switch with 20 mashines.
Any sugestions about what could be wrong?
Med venlig hilsen Gunner Poulsen Lærer på http://www.lyngbjerggaardskolen.dk Magnus' far!
Udpcast mailing list Udpcast@udpcast.linux.lu https://lll.lgl.lu/mailman/listinfo/udpcast
On 3/23/07, Gunner Poulsen gp@lyngbjerggaardskolen.dk wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The problem is that after a while 2 - 30 GB it surdently freezes and I can't get in touch with the mashine via the keyboard or anything. And the cloning-proces stops. I worked at is the whole night the other day (to 4 morning), but it keeps doing it. First I used a version 2 month old, then I updatet to the newest at that time (20070306) but is kept apering. I use no command-line-options and it is a switch with 20 mashines.
Any sugestions about what could be wrong?
Med venlig hilsen Gunner Poulsen Lærer på http://www.lyngbjerggaardskolen.dk Magnus' far!
It has happened to me. In my case, one of the machine had a bad HD. When it reaches the failing sector all the process hangs. If you can identify the machine just shut it down and after a while the others continue. If not, you can use binary search clonning half the machines and so on. Not sure if its the same problem in your case...
-
Alain Knaff -
D G Teed -
Gunner Poulsen -
Haiwei Sun -
Silvio Bandeira -
Wolfgang Schmid