13 Feb
2007
13 Feb
'07
8:43 a.m.
Dear Mikes:
Thanks for your suggestion. I tried to turn off my firewall. However, it
comes out with the same error.
Could we fix port to 5004 only to all receiver, So that all receiver can
access the same IP:Port to get the same data?
Best Regards,
Haiwei
-----Original Message-----
From: Michael D. Setzer II [mailto:mikes@kuentos.guam.net]
Sent: Tuesday, February 13, 2007 3:35 PM
To: Haiwei Sun
Subject: Re: [Udpcast] a bug from UDP-sender.exe under WinXP?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Not an expert on this, but I believe you need to open port 5005 in
addition to
the 5004 on the firewall. Usually, the udpcast uses port 9000 for the
most
part, but uses 9001 for something. Don't recall exactly what it is,
but
it
appears to be the next port after the default port.
On 13 Feb 2007 at 14:34, Haiwei Sun wrote:
Dear Sir:
I am testing UDP-sender.exe and UDP-receiver.exe under WinXP with
following commands. But a error (marked by red color) happens
after the server transfers data once. Under linux, I have never
met this problem. I am wonder if there is a bug?
UDP-sender:
C:\Documents and Settings\hwsun.PSL-AD\Desktop\UDPCast-run>udp-
sender -f test.tx
t -P 5004 -M 239.1.1.1 --daemon-mode --nokbd --min-receivers 1
Udp-sender 2007-02-05
Using mcast address 234.81.112.185
UDP sender for test.txt at 10.81.112.185 on Intel(R) PRO/100 VE
Network Connecti
on - Packet Scheduler Miniport (00-00-e2-5b-c7-66)
Broadcasting control to 239.1.1.1
New connection from 10.81.112.185 (#0) 00000009
Starting transfer: 00000009
bytes=1 230 re-xmits=0000000 ( 0.0%)
slice=0000 1 230 - 0
Transfer complete.
Disconnecting #0 (10.81.112.185)
bind socket to 10.81.112.185:5005 (Bad file
descriptor) <------------ why???
UDP-receiver:
C:\Documents and Settings\hwsun.PSL-AD\Desktop\UDPCast-run>udp-
receiver -f mytes
t.txt -P 5004 -M 239.1.1.1 --nokbd
Udp-receiver 2007-02-05
UDP receiver for mytest.txt at 10.81.112.185 on Intel(R) PRO/100
VE Network Conn
ection - Packet Scheduler Miniport (00-00-e2-5b-c7-66)
received message, cap=00000009
Connected as #0 to 10.81.112.185
Listening to multicast on 234.81.112.185
bytes=1 230 ( 0.01 Mbps) 1 230
Transfer complete.
Best Regards,
Mr. Haiwei Sun
R&D Engineer
Panasonic Singapore Laboratories Pte Ltd
Singapore
+----------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor
Guam Community College Computer Center
mailto:mikes@kuentos.guam.net
mailto:msetzerii@gmail.com
http://www.guam.net/home/mikes
Guam - Where America's Day Begins
+----------------------------------------------------------+
http://setiathome.berkeley.edu
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC TOTAL CREDITS
SETI@HOME/EINSTEIN@HOME/ROSETTA@HOME
Total Credits 2742633.750347
Total Credits 510505.776350
Total Credits 8633.726962
-----BEGIN PGP SIGNATURE-----
Version: PGP 6.5.8 -- QDPGP 2.61c
Comment: http://community.wow.net/grt/qdpgp.html
iQA/AwUBRdDdfCzGQcr/2AKZEQJaowCg4meNGC0pmWCx/ZDxJdwEYLgugRkAoJXx
fEykiFLy+GpwQe0YHKnfsa/c
=qUp3
-----END PGP SIGNATURE-----
23 Mar
23 Mar
12:14 p.m.
New subject: UDPcast sender freezes
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The
problem is that after a while 2 - 30 GB it surdently freezes and I can't get
in touch with the mashine via the keyboard or anything. And the cloning-proces
stops. I worked at is the whole night the other day (to 4 morning), but it
keeps doing it.
First I used a version 2 month old, then I updatet to the newest at that time
(20070306) but is kept apering. I use no command-line-options and it is a
switch with 20 mashines.
Any sugestions about what could be wrong?
Med venlig hilsen Gunner Poulsen
Lærer på http://www.lyngbjerggaardskolen.dk
Magnus' far!
12:59 p.m.
New subject: UDPcast sender freezes
Gunner Poulsen wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The
problem is that after a while 2 - 30 GB it surdently freezes and I can't get
in touch with the mashine via the keyboard or anything. And the cloning-proces
stops. I worked at is the whole night the other day (to 4 morning), but it
keeps doing it.
First I used a version 2 month old, then I updatet to the newest at that time
(20070306) but is kept apering. I use no command-line-options and it is a
switch with 20 mashines.
Any sugestions about what could be wrong?
Could this be a hardware issue?
Any messages displayed before the freeze? Do the caps-lock and num-lock
LEDs on the keyboard still react?
Which machine freezes? The sender, or one of the receivers? Or all at once?
Regards,
Alain
26 Mar
26 Mar
12:31 p.m.
New subject: UDPcast sender freezes
On Fri, 23 Mar 2007 13:59:10 +0100, Alain Knaff wrote
Gunner Poulsen wrote:
In that case it is not a mashine specific hardware problem. I tryed to move
the harddisk I am cloning from to another mashine and the same thing happend
(by a diferent amount of GB).
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The
problem is that after a while 2 - 30 GB it surdently freezes and I can't get
in touch with the mashine via the keyboard or anything. And the cloning-proces
stops. I worked at is the whole night the other day (to 4 morning), but it
keeps doing it.
First I used a version 2 month old, then I updatet to the newest at that time
(20070306) but is kept apering. I use no command-line-options and it is a
switch with 20 mashines.
Any sugestions about what could be wrong?
Could this be a hardware issue?
Any messages displayed before the freeze?
No.
Do the caps-lock and num-
lock LEDs on the keyboard still react?
No.
Which machine freezes? The sender, or one of the receivers? Or all
at once?
The sender. The receivers keep wating and wating.....
Med venlig hilsen Gunner Poulsen
Lærer på http://www.lyngbjerggaardskolen.dk
Magnus' far!
2:50 p.m.
New subject: UDPcast sender freezes
Gunner Poulsen wrote:
Ok, so it really does hang hard...
Interesting
Alain
In that case it is not a mashine specific hardware
problem. I tryed to move
the harddisk I am cloning from to another mashine and the same thing happend
(by a diferent amount of GB).
How different was this other machine from the first one? And what
happens if you use a different harddisk (just for testing, obviously)
Any messages
displayed before the freeze?
No.
Do the caps-lock and num-
lock LEDs on the keyboard still react?
No. Which machine
freezes? The sender, or one of the receivers? Or all
at once?
The sender. The receivers keep wating and wating..... 
3:59 p.m.
New subject: ahci-module?-trouble
I have a problem:
the sata disk (sda) is not recognized.
There is no option offered to choose a disk to copy...
(Everything works fine with older 'ide-machines')
Suse seems also to have some troubles? whereas knoppix works fine
Here is a part of the hardware-list suse 10.2. is producing:
any ideas?
Best regards, wolfgang!
I hope the length of the list below is not annoying...
...
39: IDE 00.0: 10600 Disk
[Created at block.218]
UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_ST3808110AS_9LR0G8CJ
Unique ID: z70z.YnxUayP7NI9
Parent ID: CLZK.13AlYnG+rp5
SysFS ID: /block/sda
SysFS BusID: 0:0:0:0
SysFS Device
Link: /devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0
Hardware Class: disk
Model: "ST3808110AS"
Device: "ST3808110AS"
Revision: "3.AA"
Serial ID: "9LR0G8CJ"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sda
Device
Files: /dev/sda, /dev/disk/by-id/scsi-SATA_ST3808110AS_9LR0G8CJ,
/dev/disk/by-id/ata-ST3808110AS_9LR0G8CJ, /dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0,
/dev/disk/by-id/edd-int13_dev80
Device Number: block 8:0-8:15
BIOS id: 0x80
Geometry (Logical): CHS 9729/255/63
Size: 156301488 sectors a 512 bytes
Geometry (BIOS EDD): CHS 155061/16/63
Size (BIOS EDD): 156301488 sectors
Geometry (BIOS Legacy): CHS 1023/255/63
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (SATA controller)
...
...
<6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177
<6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA
mode
<6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part
<6>ata1: SATA max UDMA/133 cmd 0xDC826100 ctl 0x0 bmdma 0x0 irq 177
<6>ata2: SATA max UDMA/133 cmd 0xDC826180 ctl 0x0 bmdma 0x0 irq 177
<6>ata3: SATA max UDMA/133 cmd 0xDC826200 ctl 0x0 bmdma 0x0 irq 177
<6>ata4: SATA max UDMA/133 cmd 0xDC826280 ctl 0x0 bmdma 0x0 irq 177
<6>scsi0 : ahci
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
<6>ata1.00: ata1: dev 0 multi count 16
<6>ata1.00: configured for UDMA/133
<6>scsi1 : ahci
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: ATAPI, max UDMA/100
<6>ata2.00: configured for UDMA/100
<6>scsi2 : ahci
<6>ata3: SATA link down (SStatus 0 SControl 300)
<6>scsi3 : ahci
<6>ata4: SATA link down (SStatus 0 SControl 300)
<5> Vendor: ATA Model: ST3808110AS Rev: 3.AA
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device : 156301488 512-byte hdwr sectors (80026 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 sda3 < sda5 sda6 >
<5>sd 0:0:0:0: Attached scsi disk sda
<5> Vendor: PHILIPS Model: DROM6316 Rev: DD01
<5> Type: CD-ROM ANSI SCSI revision: 05
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>scsi 1:0:0:0: Attached scsi generic sg1 type 5
<6>ATIIXP: IDE controller at PCI slot 0000:00:14.1
<6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ATIIXP: chipset revision 0
<6>ATIIXP: not 100% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:pio, hdb:pio
<6>ATIIXP: simplex device: DMA disabled
<6>ide1: ATIIXP Bus-Master DMA disabled (BIOS)
<7>Probing IDE interface ide0...
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<7>Probing IDE interface ide1...
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<4>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254
in
<4> res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12
in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254
in
<4> res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda6, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
<6>ata2.00: configured for UDMA/100
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2
<3>ata2.00: (irq_stat 0x40000001)
<3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in
<4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal
error)
<6>ata2: soft resetting port
<6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
23 Mar
23 Mar
1:56 p.m.
New subject: UDPcast sender freezes
I've seen a freeze from using a wireless module while
the wireless device was powered on (in a notebook being templated).
Our solution on the Dell D620 was to ensure the antenae switch was
powered off prior to imaging. Oddly enough, even with that
powered off, we were still able to grab the MAC address
for our host management database, so that was good.
Whatever is the cause, I'm pretty certain it is hardware
or kernel+hardware related and unlikely to do with udpcast
program itself. Anything that is erratic in how it fails
(e.g. measure the number of minutes into the session, or at
what step in boot up) points to pure hardware failure.
You could likely induce the same lock up by booting by PXE
and not starting the udpcast session. Just leave it for
an hour and see if it is stable.
--Donald Teed
On Fri, 23 Mar 2007, Gunner Poulsen wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The
problem is that after a while 2 - 30 GB it surdently freezes and I can't get
in touch with the mashine via the keyboard or anything. And the cloning-proces
stops. I worked at is the whole night the other day (to 4 morning), but it
keeps doing it.
First I used a version 2 month old, then I updatet to the newest at that time
(20070306) but is kept apering. I use no command-line-options and it is a
switch with 20 mashines.
Any sugestions about what could be wrong?
Med venlig hilsen Gunner Poulsen
Lærer på http://www.lyngbjerggaardskolen.dk
Magnus' far!
_______________________________________________
Udpcast mailing list
Udpcast(a)udpcast.linux.lu
https://lll.lgl.lu/mailman/listinfo/udpcast
2:55 p.m.
New subject: UDPcast sender freezes
On 3/23/07, Gunner Poulsen <gp(a)lyngbjerggaardskolen.dk> wrote:
Dear friends - I have a problem.
My UDP-cast is working very vell from PXE (that's not the problem). The
problem is that after a while 2 - 30 GB it surdently freezes and I can't get
in touch with the mashine via the keyboard or anything. And the cloning-proces
stops. I worked at is the whole night the other day (to 4 morning), but it
keeps doing it.
First I used a version 2 month old, then I updatet to the newest at that time
(20070306) but is kept apering. I use no command-line-options and it is a
switch with 20 mashines.
Any sugestions about what could be wrong?
Med venlig hilsen Gunner Poulsen
Lærer på http://www.lyngbjerggaardskolen.dk
Magnus' far!
It has happened to me.
In my case, one of the machine had a bad HD. When it reaches the
failing sector all the process hangs. If you can identify the machine
just shut it down and after a while the others continue. If not, you
can use binary search clonning half the machines and so on.
Not sure if its the same problem in your case...
--
Silvio Bandeira
5576
days inactive
5617
days old
7 comments
6 participants
participants (6)
-
Alain Knaff -
D G Teed -
Gunner Poulsen -
Haiwei Sun -
Silvio Bandeira -
Wolfgang Schmid