I am trying to push data through a one-way pipe in an automated way
using udp-sender and udp-receiver. I have a working example, but can't
get the --nokbd option to work on the sending side.
yes | ~/udp-sender --async --fec 8x6/64 --max-bitrate 500M -f
~/udp-receiver --pipe ~/rx_hook.sh --nokbd
But notice I have to pipe the "yes" command into udp-sender to trigger
the start from udp-sender. When instead I use --nokbd on the receiver,
it hangs waiting for something after the control message. True to the
documentation, it doesn't ask nor accept input, but it seems to fall
into a default of "don't send" rather than a default of "send
immediately" as I would expect.
$ ~/udp-sender --async --fec 8x6/64 --max-bitrate 500M -f
stripes=8 redund=6 stripesize=64
Using mcast address 126.96.36.199
UDP sender for .tmp_send_tarball.tar at 10.14.136.217 on eno3
Broadcasting control to 10.14.143.255
Am I missing something?