I have a problem: the sata disk (sda) is not recognized. There is no option offered to choose a disk to copy... (Everything works fine with older 'ide-machines')
Suse seems also to have some troubles? whereas knoppix works fine Here is a part of the hardware-list suse 10.2. is producing: any ideas? Best regards, wolfgang!
I hope the length of the list below is not annoying... ... 39: IDE 00.0: 10600 Disk [Created at block.218] UDI: /org/freedesktop/Hal/devices/storage_serial_SATA_ST3808110AS_9LR0G8CJ Unique ID: z70z.YnxUayP7NI9 Parent ID: CLZK.13AlYnG+rp5 SysFS ID: /block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:12.0/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "ST3808110AS" Device: "ST3808110AS" Revision: "3.AA" Serial ID: "9LR0G8CJ" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_ST3808110AS_9LR0G8CJ, /dev/disk/by-id/ata-ST3808110AS_9LR0G8CJ, /dev/disk/by-path/pci-0000:00:12.0-scsi-0:0:0:0, /dev/disk/by-id/edd-int13_dev80 Device Number: block 8:0-8:15 BIOS id: 0x80 Geometry (Logical): CHS 9729/255/63 Size: 156301488 sectors a 512 bytes Geometry (BIOS EDD): CHS 155061/16/63 Size (BIOS EDD): 156301488 sectors Geometry (BIOS Legacy): CHS 1023/255/63 Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (SATA controller) ...
... <6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 177 <6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode <6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part <6>ata1: SATA max UDMA/133 cmd 0xDC826100 ctl 0x0 bmdma 0x0 irq 177 <6>ata2: SATA max UDMA/133 cmd 0xDC826180 ctl 0x0 bmdma 0x0 irq 177 <6>ata3: SATA max UDMA/133 cmd 0xDC826200 ctl 0x0 bmdma 0x0 irq 177 <6>ata4: SATA max UDMA/133 cmd 0xDC826280 ctl 0x0 bmdma 0x0 irq 177 <6>scsi0 : ahci <6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32) <6>ata1.00: ata1: dev 0 multi count 16 <6>ata1.00: configured for UDMA/133 <6>scsi1 : ahci <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: ATAPI, max UDMA/100 <6>ata2.00: configured for UDMA/100 <6>scsi2 : ahci <6>ata3: SATA link down (SStatus 0 SControl 300) <6>scsi3 : ahci <6>ata4: SATA link down (SStatus 0 SControl 300) <5> Vendor: ATA Model: ST3808110AS Rev: 3.AA <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device : 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) <5>sda: Write Protect is off <7>sda: Mode Sense: 00 3a 00 00 <5>SCSI device sda: drive cache: write back <6> sda: sda1 sda2 sda3 < sda5 sda6 > <5>sd 0:0:0:0: Attached scsi disk sda <5> Vendor: PHILIPS Model: DROM6316 Rev: DD01 <5> Type: CD-ROM ANSI SCSI revision: 05 <5>sd 0:0:0:0: Attached scsi generic sg0 type 0 <5>scsi 1:0:0:0: Attached scsi generic sg1 type 5 <6>ATIIXP: IDE controller at PCI slot 0000:00:14.1 <6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193 <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ATIIXP: chipset revision 0 <6>ATIIXP: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0x8420-0x8427, BIOS settings: hda:pio, hdb:pio <6>ATIIXP: simplex device: DMA disabled <6>ide1: ATIIXP Bus-Master DMA disabled (BIOS) <7>Probing IDE interface ide0... <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <7>Probing IDE interface ide1... <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <4>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 1:0:0:0: Attached scsi CD-ROM sr0 <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in <4> res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x43 data 12 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x25 data 8 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in <4> res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <4>Attempting manual resume <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sda6, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata2.00: configured for UDMA/100 <6>ata2: EH complete <3>ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x2 <3>ata2.00: (irq_stat 0x40000001) <3>ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 in <4> res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x40 (internal error) <6>ata2: soft resetting port <6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)