Hi,
I post again...
It seems my post didn't reach the list...
I get really slow results with NEC AMD 64 3400+
It has Gigabit ethernet card (RTL-8169), but I only get ~10Mbps when I try to
clone to computers linked with one RJ45 cable (no switch).
I did the test with LZOP compression and image created in january 2006.
Do you know why I get slower results than when I clone old computers on my
network?
thank you very much!
--
Stephane.
PS:
I put some informations below:
sam fév 11 02:40:20 root@sargenec:~
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 47
model name : AMD Athlon(tm) 64 Processor 3400+
stepping : 2
cpu MHz : 2189.263
cache size : 512 KB
physical id : 0
siblings : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext fxsr_opt lm
3dnowext 3dnow pni lahf_lm
bogomips : 4308.99
sam fév 11 02:58:46 root@sargenec:~
#
sam fév 11 07:46:53 root@sargenec:~
# lspci
0000:00:00.0 Host bridge: ATI Technologies Inc: Unknown device 5950 (rev 10)
0000:00:02.0 PCI bridge: ATI Technologies Inc: Unknown device 5a34
0000:00:11.0 IDE interface: ATI Technologies Inc: Unknown device 437a
0000:00:12.0 IDE interface: ATI Technologies Inc: Unknown device 4379
0000:00:13.0 USB Controller: ATI Technologies Inc: Unknown device 4374
0000:00:13.1 USB Controller: ATI Technologies Inc: Unknown device 4375
0000:00:13.2 USB Controller: ATI Technologies Inc: Unknown device 4373
0000:00:14.0 SMBus: ATI Technologies Inc: Unknown device 4372 (rev 10)
0000:00:14.1 IDE interface: ATI Technologies Inc: Unknown device 4376
0000:00:14.3 ISA bridge: ATI Technologies Inc: Unknown device 4377
0000:00:14.4 PCI bridge: ATI Technologies Inc: Unknown device 4371
0000:00:14.5 Multimedia audio controller: ATI Technologies Inc: Unknown device
4370 (rev 01)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device
5b60
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
sam fév 11 07:49:04 root@sargenec:~
#
sam fév 11 02:27:07 root@sargenec:~
# hdparm -I /dev/hda
/dev/hda:
ATA device, with non-removable media
Model Number: ST380011A
Serial Number: 4LH0BNRN
Firmware Revision: 8.01
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 2
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = ?
Recommended acoustic management value: 128, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* General Purpose Logging feature set
* SMART self-test
* SMART error logging
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL
Checksum: correct
sam fév 11 02:27:53 root@sargenec:~
#
--
Stephane.