Udpcast April 2011

udpcast@udpcast.linux.lu

1 participants
8 discussions

exit code not passed if rx pipe fails
by George Coulouris 25 Apr '12

25 Apr '12

Hello, If udp-receiver is writing to a pipe and the pipe fails, udp-receiver will incorrectly exit with a returncode of zero. This is easily tested with a trivial pipe program that copies stdin to stdout, but exits with a nonzero status upon encountering eof. Adding the following to startReceiver() in udpr-negotiate.c is sufficient to fix this behavior: <---- cut here int ret; ... if(pipePid) { ret=udpc_waitForProcess(pipePid, "Pipe"); } ... return ret; <---- cut here Regards, George Coulouris National Center for Biotechnology Information (contractor)

2 1

patch submit: Use "flprintf()" on every printout on stderr
by Julien Aube 17 Jul '11

17 Jul '11

Hello, While using udpcast, I found out that it may be very verbose on stderr, even if a logfile is specified. This turns out to be a problem for our embedded application where the stderr is a (slow) serial port. So here is a patch which replace every occurrence of fprint(sdterr,...) by the flprintf() function defined in log.c. I thought it might be of some use for people. (This patch also happen to cleanup the blank spaces at end of lines) Julien -- People in the embedded space don't do prototypes. They hack something until it works, then it's done. --- Always code as if the person who will maintain your code is a maniac serial killer that knows where you live

2 1

castomize udpcast iso image
by Gianluigi Autuori 17 Jul '11

17 Jul '11

I want to use Udpcast from iso image in this scenario: - first pc boots from udpcast iso image -second pc boots from ethernet using pxe that sends him udpreceiver How can I do it? thanks

3 2

patch submit: Provide a watchdog on receiver
by Julien Aube 17 Jul '11

17 Jul '11

Hello, I've made the attached patch to prevent the situation where the udp-receiver hang out indefinitly waiting for data when the server has been killed after having started to send data. In this case, the udp-received program would hang indefinitly. Since in my program, udp-receiver is called through system(...); the result is a hang. With this patch I use a SIGALARM signal to reset a flag to 0, and act as a watchdog. The watchdog is started just before the sending data phase of the protocol, and is feed each time a packet is received from the server. If 2 times in a row the watchdog is not feed, the program exit in error. The current value is set as a #define as 60s, which is in effect 2mn before udp-receiver is actually killed. However I am aware that this implementation is somehow crude, and I would be interested by any other way to do that. Additionally, if someone is interested by this patch, I could make it so that the watchdog period is configurable on the command-line. Thanks for your time, Julien -- People in the embedded space don't do prototypes. They hack something until it works, then it's done. --- Always code as if the person who will maintain your code is a maniac serial killer that knows where you live

2 1

Support for Apple iMac keyboards (hid_apple) in udpcast images
by Frederik Himpe 17 Jul '11

17 Jul '11

I tried booting a recent Apple iMac with the latest kernel and an initrd from cast-o-matic, but the kayboard fails to work. Looking at an installed Debian system, the module hid_apple is loaded. Is this driver missing from the udpcast images, and is it possible to add it? -- Frederik Himpe <fhimpe(a)vub.ac.be> Vrije Universiteit Brussel

2 1

Socket problem in receiver
by Sergio Sánchez Vega 29 Jun '11

29 Jun '11

Hello, I´m using latest udpcast versión (20100130) in Debian machines to transfer files in unidirectional mode. Sometimes I see the next message in receiver machine: Receiver error After putting some fprintf I realized the problem is in the file udpr-negotiate.c in line 191: sock = udpc_selectSock(client_config.socks, NR_CLIENT_SOCKS, net_config->startTimeout); if(sock < 0) { return -1; } Why sock is < 0? What should I do? Thanks

2 1

static compile
by cruejones＠comcast.net 29 Jun '11

29 Jun '11

Is there an easy way to statically compile udpcast? currently: # ldd udp-receiver linux-vdso.so.1 => (0x00007fffde082000) libdl.so.2 => /lib64/libdl.so.2 (0x00007fd71bef7000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fd71bcda000) libc.so.6 => /lib64/libc.so.6 (0x00007fd71b97c000) /lib64/ld-linux-x86-64.so.2 (0x00007fd71c0fb000) thanks

2 1

iso request with new module for network card Broadcom BCM57780
by Bruno Gallinari 11 Apr '11

11 Apr '11

Good afternoon, I request the inclusion of the Broadcom BCM57780 module for using the boards of Dell Optiplex 380 computers. Regards. -- Bruno R. Gallinari

1 0

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Udpcast April 2011